Virtual serial port redirection using socat

Here’s how socat can be used to redirect one serial port to another on Ubuntu

sudo socat -d -d pty,link=/dev/ttyS0,raw,echo=0 pty,link=/dev/ttyS1,raw,echo=0

Assuming both serial devices above are not assigned to a real device. If the above command is successful, you can send data from on serial port to another using a terminal emulator such as screen

screen /dev/ttyS0 115200

Install screen using sudo apt-get screen if not already installed. Repeat the above command on another prompt for the other serial device, and you’re good to go. Quit screen using Ctrl-A .

socat can also be used to perform serial to TCP redirection

sudo socat -d -d pty,link=/dev/ttyS0,raw,echo=0 tcp-listen:8000

Now, you should be able to use screen to send and receive data on the serial port, while you use something like netcat to receive and send data to the serial port

netcat 8000

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s